R401 series is a new generation of smart access control card readers developed by our company, with high-end appearance, fast scanning speed, high recognition rate, strong compatibility, and can be connected to any access control controller that supports Wiegand input.
This series is suitable for various application scenarios, and supports the identification of RFID radio frequency cards and QR codes, which can be used in community management, visitor management, hotel management, unmanned supermarkets and other fields.
|
Model |
Description |
|
R401-B-S |
Support QR code, barcode, card reading, support get UID of Chinese ID card |
|
R401-S-S |
Support QR code, barcode, card reading, support get UID and information of Chinese ID card |
|
R401-B-S-N |
Support QR code, barcode, card reading, support get UID of Chinese ID card Support TCP/IP network function |
|
DC(+12V) |
GND |
485A |
485B |
WG0 |
WG1 |
NO |
COM |
NC |
Config |
|
Power |
Ground |
RS485 Interface |
WG Interface |
Normally Open |
Public |
Normally Closed |
Configuration Interface |
||
|
Params. |
description |
|
Card type |
Ultralight、MF1（S50,S70）、Desfire EV1、NTag、NFC（Simulation card）、CPU、Chinese ID cards（UID）and other ISO/IEC14443A cards、15693 cards、electronic QR code, paper QR code |
|
Communication Interface |
Weigand、RS485、USB |
|
Working voltage |
DC 12V（±5%） |
|
Working current |
260mA |
|
Working temperature |
-10℃~+50℃ |
|
Storage temperature |
-20℃~+80℃ |
|
Working humidity |
20% ~ 80% |
|
Code types |
QR、UPC-A/E0/E1、Data Matrix、Matrix2 of 5、PDF417、Code 11/39/93128、Codabar、 Interleaved 2 of 5 |
|
Sensing angle |
Rotate 360°，angle ±45° |
|
Sensing distance |
IC cards: longer than 5cm， Chinese ID cards: longer than4cm, QR code: 5-18cm（depends on IC card type、scanning angle、ambient light intensity） |
|
Scanning angle |
34°（H），26°（V） |
|
Resolution ratio |
648（H）×488（V） |
|
Sensing speed |
80ms（average） |
|
USB wire |
USB to Mini USB，L=1500mm±0.3mm |
|
size |
86*86*50mm(tolerance±0.3) |
Online Message
