R212 series is a contactless RF access control card reader with buttons.The container adopts Chinese style design and incorporates the modern minimalist deformation pattern of Chinese knots, which is suitable for both antique Chinese architectural design and modern architectural environment with minimalist style.It is suitable for access control, visitor management, entry and exit gates, and unmanned supermarkets. , building automation, elevator control and other fields.
The card reader has its own configuration card configuration function, which supports flexible configuration of various parameters of the card reader through the configuration card, such as card key, card number output format, Wiegand mode, which makes the card reader very convenient to meet various personalized Customer demand, improve service efficiency.
|
Model |
Description |
|
R212E |
Support Weigand interface Support get physical card number of ID thick card, ID thin card, ID key-chain card |
|
R212M |
Support Weigand interface，support protocol ISO/IEC14443A/B 1、Support get physical card number of S50/S70/desfire/NTAG213/NTAG216/ultrlight/FM1204/FM1208 2、Support get physical card number of Chinese Identity card |
|
Params |
Description |
|
Frequency |
13.56MHz、125KHz |
|
Working voltage |
DC 12V（±5%） |
|
Working current |
≤200mA |
|
static current |
≤150mA |
|
Card type |
IC or ID（Mifare S50、S70、CPU etc.） |
|
Weigand format |
W26 / W34 |
|
Sensing distance |
0-3CM（depends on card type and work environment） |
|
Working humidity |
20%-80% |
|
Working temperature |
-20℃~+65℃ |
|
Storage temperature |
-20℃~+80℃ |
|
Output short circuit protection time |
≤100µs |
|
Wiring Definition |
Red(VCC) Black(GND) White(D1) Green(D0) Purple(Beer) Gray(CLED) Yellow(output WG26 connect to GND) |
|
size |
90*90*16mm(tolerance±0.2) |
Online Message
